It wasn't very long ago that I was on a desperate search for dining room chairs. The two that I pulled out of the dumpster didn't quite cut it in my new, larger, dining room. And buying them new is expensive! So I did what I do, and went to the flea market.
There, I found a set of four chairs in reasonably decent shape, just needing new seats - piece of cake! That same weekend, my mom showed up with two more chairs, of a similar style but with higher backs, also needing new seats. Presto, I have a set of six dining chairs!
A few weeks later, I wound up the lucky recipient of four more dining chairs that had previously been owned by my grandmother, and were not only in perfect condition, but were also delightfully Mid-Century Modern. Now I have ten dining room chairs in two very different styles. I think this is what they mean when they say "an embarrassment of riches."
But while I had a plethora of indoor seating, I was sorely lacking in outdoor seating. That is, until I had the idea to combine three of the chairs into a bench for my back porch! Here's what I did...
First, of course, I removed the existing seats, gave the chairs a rough sanding, and cut down the legs on the middle chair a bit, to make the heights all even.
I'm going for a shiny metallic finish, and I read somewhere that a coat of black paint underneath the metallic will help it shine. They don't really make black spray paint primer though, so I just used regular black spray paint. We'll see if it works!
Then I had Garrett help me cut a piece of plywood to the right shape to stretch across all three chairs, including the little notched out piece in the back of the middle chair.
Looking like a bench already! There are some reinforcements under the seats that you can't see - the plywood wasn't a sturdy enough base to keep the chairs from wobbling around when you lifted the whole thing up. We cut wood blocks and used them to attach the bottoms of the chairs together with long wood screws.
Once the seat was cut, it was time for the fun part - upholstery! I bought the fabric on etsy, and ironed on this vinyl coating, to make it waterproof. I didn't want to simply use outdoor fabric as I knew it would get dirty really quickly, living outside. And I didn't want the foam to get wet and deteriorate. With this iron on stuff, you can just hose off the seat when it gets dirty! The only bummer is that the vinyl only comes in 18" widths, so you have to cut two pieces and overlap them a bit. It's not hard, just a little time consuming.
I used three inch high density foam (also from amazon, which was way cheaper than Joanns), spray adhesive, and my trusty staple gun to attach it all to the plywood backing.
I attached the seat to the newly assembled bench through the original seat screw holes, and voila! A totally cute outdoor bench that seats three!
Now all I need is a cute outdoor space to put these in.
