A Very Chair-y Seating Situation

It wasn't very long ago that I was on a desperate search for dining room chairs. The two that I pulled out of the dumpster didn't quite cut it in my new, larger, dining room. And buying them new is expensive! So I did what I do, and went to the flea market.

There, I found a set of four chairs in reasonably decent shape, just needing new seats - piece of cake! That same weekend, my mom showed up with two more chairs, of a similar style but with higher backs, also needing new seats. Presto, I have a set of six dining chairs!

A few weeks later, I wound up the lucky recipient of four more dining chairs that had previously been owned by my grandmother, and were not only in perfect condition, but were also delightfully Mid-Century Modern. Now I have ten dining room chairs in two very different styles. I think this is what they mean when they say "an embarrassment of riches."

But while I had a plethora of indoor seating, I was sorely lacking in outdoor seating. That is, until I had the idea to combine three of the chairs into a bench for my back porch! Here's what I did...

First, of course, I removed the existing seats, gave the chairs a rough sanding, and cut down the legs on the middle chair a bit, to make the heights all even.

I'm going for a shiny metallic finish, and I read somewhere that a coat of black paint underneath the metallic will help it shine. They don't really make black spray paint primer though, so I just used regular black spray paint. We'll see if it works! 

Then I had Garrett help me cut a piece of plywood to the right shape to stretch across all three chairs, including the little notched out piece in the back of the middle chair. 

Looking like a bench already! There are some reinforcements under the seats that you can't see - the plywood wasn't a sturdy enough base to keep the chairs from wobbling around when you lifted the whole thing up. We cut wood blocks and used them to attach the bottoms of the chairs together with long wood screws.

Once the seat was cut, it was time for the fun part - upholstery! I bought the fabric on etsy, and ironed on this vinyl coating, to make it waterproof. I didn't want to simply use outdoor fabric as I knew it would get dirty really quickly, living outside. And I didn't want the foam to get wet and deteriorate. With this iron on stuff, you can just hose off the seat when it gets dirty! The only bummer is that the vinyl only comes in 18" widths, so you have to cut two pieces and overlap them a bit. It's not hard, just a little time consuming. 

I used three inch high density foam (also from amazon, which was way cheaper than Joanns), spray adhesive, and my trusty staple gun to attach it all to the plywood backing.

I attached the seat to the newly assembled bench through the original seat screw holes, and voila! A totally cute outdoor bench that seats three!

Now all I need is a cute outdoor space to put these in. 

One Man's Trash...

Can be a clever crafter's treasure! A few weeks ago, I saw a set of dining room chairs in the dumpster near the back of the Meganplex. Someone had fun smashing them to pieces, but one of them was pretty much intact, and another was just missing the leg dowels. You can see from the "before" picture that they had really good bones.



And of course, I can't be expected to leave a project like that sitting out for the garbage collector. So, I hauled those puppies home and set to gluing, screwing, puttying, sanding, painting, and new-seat-constructing. I ordered the Waverly "Lovely Lattice" fabric from Joanns.com when they were having a 60% off sale. It took a full two weeks to get to me, but it was totally worth the wait (and the discount).



Once they were done, I realized I couldn't have such lovely chairs paired with my boring black Ikea dining room table (I have standards, you know). So I had to make that over too. Stay tuned for the results!

Afters

Remember these Befores, from approximately one million years ago? Well, I've finally gotten around to taking the After photos. Forgive the quality, I took them in the very yellow Tungsten light of my apartment.

The chair was an easy fix - a little paint and strategically placed glue and screws, an inch of foam and some pretty fabric, and Bob's your Uncle.



The desk took a LOT more work. That thing had four layers of paint that I had to chip, scrape, and sand my way through - I even burned out the motor on my old belt sander (giving me an excuse to finally upgrade to a sleek new orbital). After three new coats of of hard-wearing exterior black paint, polished nickel cup pulls, and a bonus coat of spray paint on the under side of the glass top (gives it a high gloss, lacquered look), Fanny was FINALLY my Aunt.



Put them together, and they make a cute little vignette!



Due to the extremely limited amount of space in the Meganplex, the desk (and silver dome light shown in the last pic) are going up for sale on Seedling. Happy shopping!

Chair Makeover

As I was walking my dog last November, I came across this little beauty sitting on the street corner. Don't worry, it had only been out there a few minutes before I snagged it (not long enough for the hobos to pee on it).



I had been hankering to try a tailored slipcover like the kind they're always making on Trading Spaces, and this free chair was the perfect way to break in my new staple gun. A few yards of Lena fabric from Ikea, and some high gloss brown paint for the legs, and I was in business!

Mimicking what I had seen on TV, I cut largish pieces of fabric, and pinned them directly to the chair. Then I put pins all along where the seams were in the current design. The curved back created some difficulties that I had to improvise around, and fitting the cover back on the chair after it had been sewn was a bit of a problem. Since the top of the chair is wider than the base, I ended up hand-sewing the final seam to make it fit. Overall, the process was trial by error, but I think the results are pretty satisfactory!



Right?